Nº 1.- Carburetor for F2B engines
This carburetor is suitable for Stalker and all of other types of big F2B aerobatics engines. Diameter is 4 mm. Minimum fixing width is 16 mm and maximum is 19 mm
Nº 2.- Carburetor for diesel combat or sport
Standard tunning carburetor adaptable to any type of engines. Comes with gland nut for fixing needle. 4 mm diameter. It's ideal for Combat diesel engines. Diameter is 4 mm. Minimum fixing width is 11,6 mm and maximum is 13 mm. Fits to all Parra engines.
Nº 3.- Carburetor for F2D combat or sport
This is a fine tunning carburetor as standard design but without wire and bigger knob for use in combat models. Comes with O-ring for perfect sealing. 4 mm diameter. Diameter is 4 mm. Minimum fixing width is 11 mm and maximum is 13 mm. Fits to all Parra engines and most of engines.
Nº 4.- Carburetor for Team Racing or Sport flying
Fine tunning carburetor with fixing nut, adaptable to any type of engines. Comes with O-ring for perfect sealing. You can bend the wire to suit you needs. 4 mm diameter. Fits to all Parra engines. Minimum fixing width is 11 mm and maximum is 13 mm.
Nº 5.- Carburetor for Team racing
This is a fine tunning carburetor as standard design but smaller diameter fuel intake glans and narrow needle to adapt engine to cowled Team Racing models . Also has a slot to facilitate setting of NVA on inverted engine . Comes with O-ring for perfect sealing. 4 mm diameter. Fits to all Parra engines. Minimum fixing width is 11 mm and maximum is 13 mm
Nº 6.- Carburetor for 1,5 - 2,5 cc Combat or Sport (curved)
Fine tunning carburetor with fixing nut, adaptable to any type of engines. Comes with neoprene tube for sealing and curved intake. 4 mm diameter. Minimum fixing width is 11 mm and maximum is 13 mm. Fits to all Parra engines.
Nº 7.- Carburetor for 1,5 - 2,5 cc Combat or Sport (straight)
Fine tunning carburetor with fixing nut, adaptable to any type of engines. Comes with neoprene tube for sealing and straight intake 4 mm diameter. Minimum fixing width is 11 mm and maximum is 13 mm. Fits to all Parra engines.
Nº 8.- Carburetor for F2D combat STD
This is a usual NVA used for all F2D combat engines. For pressure installation to crankcase.
SECURING BOLT
Securing bolt, for fix ventury or R/C carburettors. .15 -.20 engines. Diameter 4 mm
ENYA VENTURY
Original ENYA nylon venturis with neoprene joint. Very fine finish. Adaptable to either control line engine.
REF ENGINE VENTURY (mm) SHANK (mm)
S5021 SS40 -50SS - 61CXS 7 13
S5022 SS40 -50SS - 61CXS 7,5 13
S5023 SS40 -50SS - 61CXS 8 13
S2521 SS25 - SS35 - 35 X - 40 XZS 6,5 12
S2522 SS25 - SS35 - 35 X - 40 XZS 7 12
S1521 11CX - SS15 6 10
S1522 11CX - SS15 6,5 10
S15521 15 -19 -20 cross flow 6 8,8
S15522 15 -19 -20 cross flow 6,5 8,8
S15523 15 -19 -20 cross flow 7 8,8